The RAM WORLD WIDE WEB SITE

Ram Track Electronic Devices ....

Most RAM Track products are adaptable to all popular scales, N through G. Some are more scale specific due to bulb or speaker size limitations. Our products have an established reputation for innovation and dollar value. All RAM Track products are made in the U.S.A.

LIGHTING SYSTEMS
RAM Track light systems utilize both instrument quality, incandescent bulbs (55, 56, 57, 58, 86) and new, high performance white LEDs (91, 92). The incandescent systems feature adjustable flash rate. The LED systems can be used with the RAM 101 Light Pipe for extremely small light installations.

RAM 55 SINGLE ADJUSTABLE "STROBE" LIGHT.
This device simulates a strobe light for engine mount or End of Train use. The bulb, on a 12" lead, is HO scale and two clear lens caps provided, are appropriate for O and G scale. The 7/8" x 1-1/8" circuit board provides flash rate adjustment, an inline switch and is powered by a 9 volt ALKALINE battery so there is full brightness without waiting for power to come from the rail.  Use a RAM 59 for rail power.

RAM 56 DUAL ADJUSTABLE "STROBE" LIGHT.
This device has the same features as the RAM 55 but has 2 bulbs which can flash simultaneously or alternately as appropriate for the particular model. 4 lens caps are provided for O and G scale. Use a RAM 59 for rail power.

RAM 57 SINGLE ADJUSTABLE "REVOLVING" BEACON.
This device simulates a revolving beacon for engine mount or an oscillating headlight. The circuit board is 1" x 1-3/8" and provides for adjusting the "revolving" rate. All other features are the same as the RAM 55. Use a RAM 59 for rail power.

RAM 58 DUAL ADJUSTABLE "REVOLVING" BEACON.
This device has the same features as the RAM 57 but has 2 bulbs which can "revolve" simultaneously and 4 lens caps for O and G scale. Use a RAM 59 for rail power.

RAM 86 DARKNESS SENSING STRUCTURE LIGHTS.
An adjustable level, light sensing circuit turns on two high efficiency, replaceable lamps. each on 12 inches of wire. Requires 12 to 18 volts D.C. from your train power pack or an alternate source.

RAM 91 SINGLE FLASHING WHITE.
This system provides a single strobe effect using a T1, 1/8" diameter (3MM) LED on 1 foot of high quality #30 flexible wire connected to a 5/16" x 5/8" x 1-7/8'' circuit board. The system is complete and ready to install for low voltage rail power, nothing extra to buy.

RAM 92 DUAL FLASHING WHITE.   New
All the features of the RAM 91 above but includes two, independently flashing, white LEDs for a dual strobe effect. The circuit board is 5/16" x 5/8" x 2-3/4''.

RAM 93 SINGLE FLASHING RED.   New
Ideal for FRED installations. All the features and specifications of the RAM 91 above but utilizing a red LED.

RAM 101 LIGHT PIPE. New
This kit enables you to bring light to parts of your model where it is not practical or scale appropriate to mount LEDs. The kit includes 36 inches of fiber optic cable which provides a "light" .040 in diameter and simple shrink tubes for connecting the cable to the RAM LEDs. The cable can be cut to lengths appropriate for any model.

RAM 109 SINGLE HEADLIGHT-SUPER BRIGHT.  
For HO to G this system uses a T1 3/4, 3/16 diameter (5MM) white LED on 1 foot of high quality #30 flexible wire connected to 5/16" x 5/8" x 1" circuit board. The system is complete and ready to install for low voltage track power Nothing extra to buy.

RAM 110 DUAL HEADLIGHT-SUPER BRIGHT.  
All the same features of the RAM 109 but has two T1-3/4, white LEDs.

RAM 115 Mini Single Headlight-Super Bright
1 white 3MM LED w/low voltage, track power circuit

RAM 116  Mini Dual Headlight-Super Bright
2 white 3MM LED w/low voltage, track power circuit 

RAM 118 DITCH LIGHTS- SUPER BRITE This mini module alternatly flashes two T1, 1/8" (3mm) WHITE LEDs, each on 1 foot of high quality #30 wire. Included are two 3/16" clear lenses for larger scales. The flash rate is adjustable and the system is designed low voltage rail power.

RAM 119  Crossing Lights This inexpensive mini module alternatly flashes two T1, 1/8" (3mm) red LEDs and operates on 5 - 24 volts DC. Includes 2, 3/16" red lenses for larger scales. A perfect match for the RAM117 DUAL SENSOR SWITCH!

RAM 126  SINGLE HEADLITE, SUPER BRITE, to 24Volts
Designed for G scale DCC, Lionel Command Control and any other uses where track power is at higher voltages. A single T1, 1/8" (3mm) LED is used and a 3/16" and 1/4" clear lenses are also provided.

RAM 127  DUAL HEADLITE, SUPER BRITE, to 24Volts The same as RAM126 above but with two T1 LEDs and 4 lenses.

RAM 128 DITCH LIGHTS, SUPER BRITE, to 24Volts The same as RAM118 above but capable of higher voltage and with two T1 LEDs and 4 lenses.

RAM 129  (Under Construction) CAMP FIRE/ FIRE BOX LITES, Multiple, low power red and yellow LEDs flash to simulate a fire. The circuit board requires 9 to 24 volts AC or DC.

RAM 130  RAM 130, GAS CAR HEADLITES W/BRAKE LITES Similar to RAM120 but the two red tail lites are controlled by a switch attached to you throttle servo so they light automatically when the vehicle slows down.

RAM 131  CONSTANT R/R INTERIOR LIGHTS, For HO to G gauge trains, this bulb system includes 2, AA Nicad cells with 1/2" x 2" circuitry for track charging. Interior lights stay realistically lit even when there is NO POWER from the track Perfect for cabs, coaches and cabooses. $24.95.

RAM 132  PARK FLYER LITES
RAM 133  MAX LITES, This system has two Ultra Brite LED head lights with 2 red/stop lites controlled by a switch attached to the throttle servo and powered by a 6.7 cell nicad or a 9 volt alkaline (6 hours). $29.95

RAM is known for producing unique, top quality, American made products that offer the best dollar value on the model market.